Diskette Drive - Gateway Desktops User Manual

CHAPTER 14: Troubleshooting

Diskette drive

162
Make sure that the volume controls are turned up. For more information,
■
see "Adjusting the volume" on page
Make sure that the mute controls are turned off. For more information, see
■
"Adjusting the volume" on page
Make sure that the speaker cables are connected correctly and securely.
■
Shut down and restart your computer.
■
Clean the disc. For more information, see
■
page 125.
Reinstall the audio device drivers.
■
A DVD movie will not play
Make sure that you have a DVD drive. To identify your drive type, see
■
"Identifying drive types" on page
Make sure that the disc label is facing up, then try again.
■
Try a different disc. Occasionally discs are flawed or become scratched and
■
cannot be read by the DVD drive.
Shut down and restart your computer.
■
Clean the disc. For more information, see
■
page 125.
Reinstall the device driver.
■
Make sure that the DVD program has been installed on your computer.
■
DVDs and DVD drives contain regional codes that help control DVD title
■
exports and help reduce illegal disc distribution. To be able to play a DVD,
the disc's regional code and your DVD drive's regional code must match.
The regional code on your DVD drive is determined by your computer's
delivery address. The regional code for the United States and Canada is 1.
The regional code for Mexico is 4. Your DVD drive's regional code must
match the regional code for the disc. The regional code for the disc is on
the disc, disc documentation, or disc packaging.
If the DVD movie does not play, the disc's regional code and your DVD
drive's regional code may not match.
The diskette drive is not recognized
Shut down and restart your computer.
■
You cannot save a file to diskette or you see the message "disk is full or
write-protected"
Make sure that the write-protection tab on the upper-right corner of the
■
diskette is down (unprotected).
Delete unnecessary files on the diskette and try again.
■
Make sure that the diskette you are using is IBM-compatible.
■
Try a different diskette. Occasionally diskettes are flawed and cannot be
■
read by the diskette drive.
Run Error-checking on the diskette. For more information, see
■
the hard drive for errors" on page
If errors are detected and corrected, try using the diskette again.
60.
60.
"Cleaning CDs or DVDs" on
53.
"Cleaning CDs or DVDs" on
128.
www.gateway.com
"Checking