Sharp AL-2051 Service Manual page 92

Main Sub
Contents
code code
43 01 Fusing temperature setting
(Normal copy)
04 Fusing temperature setting
in multi copy
[Function]
Used to set the fusing temperature of 3rd or later sheet. (For 1st and 2nd sheets, SIM 43-14 is
used.)
When this simulation is executed, the current set code number is displayed. Press [Numeric]
key to change the setting and press [ENTER]/[START] key to save the setting into the EER-
POM. The machine goes into the sub code entry standby mode.
The [ ] [ ] key is used to select the mode.
Code Set temperature (°C)
0 170
1 175
2 180
3 185
4 190
Mode
Main cassette paper feed
Manual paper feed
* The cassette feed and the manual feed are controlled similarly.
[Operation]
1) Initial display <Main cassette paper feed
setting>
43-01 FU TEMP
TRAY1 6( 0-8 )
2) [ ] [ ] key: Mode selection
43-01 FU TEMP
MFT 6( 0-8 )
[Function]
For 20th sheet or later in multi copy, the fusing temperature is automatically changed from the
temperature set with simulation 43-01 to the temperature set with this simulation.
When this simulation is executed, the current set code number is displayed. Enter the code
number and press [ENTER]/[START] key to change the setting.
Code Set temperature (°C)
0 165
1 170
2 175
3 180
4 185
5 190
6 195
7 200
Mode
Main cassette paper feed
Manual paper feed
Main cassette paper feed (small-size)
Manual paper feed (small-size)
∗ The cassette feed and the manual feed are controlled similarly.
[Operation]
The operation is similar to simulation 43-01.
AL-2051 SIMULATION, TROUBLE CODES 10 - 16
Details of function/operation
Remark Code Set temperature (°C)
5
6
7
8
Display item
TRAY1
MFT
3) [Numeric] key: Value entry
43-01 FU TEMP
MFT
4) [ENTER]/[START] key
Settles the entered value. The display is
shifted to the sub code input standby
menu.
Remark
Display item
TRAY1
MFT
TRAY1 SH
MFT SH
Remark
195 Default
200
205
210
6( 0-8 )
Default
3
3
1
1