Assembly Procedure; Tray Paper Feed/Transport Section; List; Disassembly Procedure - Sharp AL-2051 Service Manual

7) Remove the parts from the heat roller.
Note: Apply grease to the sections specified with ∗1.
Grease: "JFE552" UKOG-0235FCZZ
1
8) Remove two screws and remove the thermo unit.
Note: The set temperature of the thermostat differs from that of the
current model.
Temperature
AL-2051 230°C
3)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1 3)
2)
1
1)
1)
2)
AL-2051 DISASSEMBLY AND ASSEMBLY 8 - 8

5. Tray paper feed/transport section

A. List
No. Part name Ref.
1 PPD1 sensor PWB
2 POD sensor PWB
3 LSU unit
4 Intermediate frame unit
5 Paper feed roller
B. Disassembly procedure
1) Remove the paper holding arm.
Remove the arm holder from the main unit, and remove the
holder from the arm.
1)
2)
2)
3)
4)
2) Remove two screws, and remove the hinge guide R.
3) Disconnect the connector. (2 positions)
4) Remove five screws, and remove the scanner unit.
5) Remove the fan duct.
2)
2)
3)
2)
2)
2)
2)
1)
2)