Power To Copier; Software; Before Installation - Sharp AL-2051 Service Manual

3) Store the pressure plate lock which has been removed in step
2). To store the pressure plate lock, rotate the lock to fix it on
the relevant location.
Pressure plate lock
4) Adjust the paper guides on the paper tray to the copy paper
width and length. Squeeze the lever of paper guide (A) and
slide the guide to match with the width of the paper. Move
paper guide (B) to the appropriate slot as marked on the tray.
Paper guide (B)
5) Fan the paper and insert it into the tray. Make sure the edges
go under the corner hooks.
Note: Do not load paper above the maximum height line (
Exceeding the line will cause a paper misfeed.
6) Gently push the paper tray back into the unit.

8. Power to copier

Ensure that the power switch of the unit is in the OFF position. Plug
the other end of the power cord into the nearest outlet. Turn the
power switch on the left side of the unit to the "ON" position. The
start ( ) indicator will light up and other indicators which show the
initial settings of the operation panel will also light up to indicate the
ready condition.

9. Software

The CD-ROM that accompanies the machine contains the following
software:
MFP driver
Printer driver
The printer driver enables you to use the printer function of the
machine.
The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.
Scanner driver*
The scanner driver allows you to use the scanning function of the
machine with TWAIN-compliant and WIA-compliant applications.
Printer Status Monitor
"Printer Status Monitor" allows the user to check on the computer
screen whether or not the machine is able to print.
It provides information on error states such as paper misfeeds and
shows the configuration of the machine (number of trays, etc.) by
means of illustrations.
Available paper sizes and paper remaining are also indicated.
Paper guide (A)
Button Manager*
Button Manager allows you to use the scanner menus on the
machine to scan a document.
Sharpdesk*/Network Scanner Tool*
).
Sharpdesk is an integrated software environment that makes it
easy to manage documents and image files, and launch applica-
tions. Network Scanner Tool is a utility that helps you use Scan to
Desktop. Those are contained in the separate Sharpdesk CD-ROM.
* The scanning feature can only be used with computers that are
A. Before installation
(1) Hardware and software requirements
Check the following hardware and software requirements in order to
install the software.
*1: Compatible with Windows 2000 Professional, Windows XP
*2: Printing is not available in MS-DOS mode.
*3: The machine does not support printing from a Macintosh envi-
*4: Administrator's rights are required to install the software using
AL-2051 UNPACKING AND INSTALLATION 5 - 3
connected to the machine by a USB cable. If you are connected
to the machine by a LAN connection only the printer function can
be used.
Computer type IBM PC/AT or compatible computer
equipped with a USB2.0 *1 or 10Base-T
LAN interface
Operating system*2 *3 Windows 2000 Professional *4, Windows
XP *4, Windows Vista *4, Windows 7
Display 1024 x 768 dots resolution and 16-bit
color or higher is recommended.
Hard disk free space 150 MB or more
Other hardware An environment on which any of the
requirements operating systems listed above can fully
operate
Professional/Home Edition, Windows Vista or Windows 7 pre-
installed model standardly equipped with a USB port.
ronment.
the installer.