Operation Panel - Sharp AL-2051 Service Manual

3. Operation panel

1
1 [MODE SELECT] key / Mode indicators
Press this key to select the mode. The indicator of the selected
mode lights (copy, printer, scanner mode indicators).
3 Numeric keys
Use these to enter the number of copies and other numerical
settings.
The keys can also be used to select items in function setting
menus.
5 Power save indicator
This lights up when the power save function is activated.
7 Error indicator
This lights steadily or blinks when a paper misfeed or other error
occurs.
9 Tray location indicator
Indicates the selected paper tray. The indicator blinks when the
tray is out of paper or is not closed.
11 [2-SIDED COPY (
)] key
Use to copy both sides of an original.
13 [ ] key ( ), [ ] key (
Press the [ ] key (
in a function setting menu.
Press the [OK] key to enter a selection.
15 [ZOOM] key
Press to select an enlargement or reduction ratio.
To select a preset ratio setting, press the [ZOOM] key and select
the desired preset ratio. To select a ratio that is not preset, press
the [ZOOM] key, select the preset ratio that is closest to the
desired ratio, and then press the [
( ) to increase or decrease the ratio in increments of 1%.
17 [START] key (
) / Ready indicator
The ready indicator lights up when copying or scanning is possi-
ble.
To begin copying, press the [START] key (
The [START] key ( ) is also pressed to return to normal oper-
ation from auto power shut-off mode.
19 Shows the selected paper size.
21 A checkmark " " appears when the exposure has been
changed, or when two-sided copying, sort, 2 IN 1, or margin shift
is selected.
2
6 7 8 9 10 11 12 13 14
), [OK] key
) or [ ] key ( )to select an item
] key ( ) or [
).
AL-2051 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
3
15
Display
READY TO COPY.
100%
18
2 Display
This shows messages indicating the machine status and any
problems that occur, as well as user programs and function set-
ting menus.
4 [CLEAR] key (
Use this to clear the set number of copies, as well as cancel a
job that is in progress. When a setting menu appears, use this
key to move back to the previous menu level.
6 RSPF indicator
This lights up when an original is placed in the RSPF.
8 [TRAY SELECT] key (
Use to select the paper tray that has the desired paper for copy-
ing.
10 [MENU] key
Press this key to select the paper size for copying, to configure a
user program or to display the total count.
12 [E-SORT/SP.FUN (
Press to select the sort function, 2 IN 1 copy function, or margin
shift function.
14 [EXPOSURE (
)] key
Use to switch from auto exposure adjustment to text mode or
photo mode.
16 [CLEAR ALL] key (
This returns all functions to the default settings. When pressed in
a setting menu, this returns the settings and display to the initial
state.
] key
18 Shows the current copy ratio.
20 Shows the number of copies that has been entered with the
numeric keys.
4 5
16 17
A4 0
19 20 21
)
)
)] key
)