Quick Start Mode - Lexmark C920 User Manual

Printing Lockout
Printing Lockout lets you lock or unlock a printer using an assigned PIN. When locked, every job the printer receives will
buffer to the hard disk. A user can print jobs only by entering the correct PIN on the operator panel. You can assign a PIN
through the Web page of the device.
To set Printing Lockout:
1
Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the
format: http://ip_address/.
2
Click Configuration.
3
Under Other Settings, click Security.
4
Click Printer Lockout PIN.
Confidential Print Setup
Confidential Print Setup lets you designate a maximum number of PIN entry attempts and set an expiration time for print
jobs. When a user exceeds a specific number of PIN entry attempts, all of that user's print jobs are deleted. When a user
has not printed their jobs within a designated time period, the print jobs are deleted. To activate Confidential Print Setup:
1
Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the
format: http://ip_address/.
2
Click Configuration.
3
Under Other Settings, click Security.
4
Click Confidential Print Setup.

Quick start mode

Quick start mode allows the printer to begin printing before the engine has warmed to normal operating temperature. With
quick start, when the printer is in standby mode and receives a print job, pages print slowly at first, and then more quickly
once the printer warms up. This reduces the overall time required to print a job from standby mode. Quick start is on by
default.
To turn quick start off:
1
Press
2
Press
3
Press
4
Press
Downloaded From ManualsPrinter.com Manuals
Note: This setting is only available when a hard disk is installed.
Note: Back channel data will be processed while the printer is locked. Reports such as user or event logs
can be retrieved from a locked printer.
Note: This feature is only available on network models.
on the operator panel.
until Setup Menu appears, and then press
until Quick Start appears, and then press
until Off appears, and then press
Administrative support
.
.
.
Quick start mode
136