Lexmark C920 User Manual page 64

5
Load the media in the tray and push the set button to raise the media for feeding.
Use the stack height label as a guide for stack height when loading print media.
Loading paper, transparencies, or envelopes
Load envelopes flap side down. Orient them as indicated by the icons on the multipurpose feeder.
–
Loading letterhead or preprinted paper
•
•
•
6
Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the
correct value for the print media you loaded.
a Press
b Press
c Press
d Press
e Press
f Press
g Press
h Press
i Press
j Press
k Press
l Press
m Press
The printer returns to the Ready state.
Downloaded From ManualsPrinter.com Manuals
Note: Letterhead or other preprinted paper must be loaded differently depending on the options you have
installed.
Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These
envelopes may severely damage the printer.
Note: Load only one size and type of print media at a time in the multipurpose feeder. Do not mix sizes and
types in the same tray.
Print side face up for simplex (single-sided) printing
Print side face down for duplex printing
Do not fill paper above the load line. Overfilling the tray may cause jams.
on the operator panel.
until you see
Paper Menu.
.
until you see
Paper Size/Type.
.
until you see
MP Feeder Size/Type.
.
until the appears next to the media size you loaded.
.
until you see
MP Feeder Size/Type.
.
until the appears next to the media type you loaded.
.
Loading the multipurpose feeder
Printing
64