Reducing Printer Noise; Adjusting Power Saver - Lexmark C544DTN - Color Laser Printer 25/25 Ppm Duplex Networkfront Pic User Manual

Reducing printer noise

Use Quiet Mode to reduce the printer noise.
Note: See the table for the multiple settings that change when you select a Quiet Mode setting.
Choose
On
Off
To select a Quiet Mode setting:
1
From the printer control panel, press
2
Press the arrow buttons until Settings appears, and then press
3
Press the arrow buttons until General Settings appears, and then press
4
Press the arrow buttons until Quiet Mode appears, and then press
5
Select the setting you want, and then press
Submitting changes appears.

Adjusting Power Saver

1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Settings appears, and then press
4
Press the arrow buttons until General Settings appears, and then press
5
Press the arrow buttons until Timeout appears, and then press
6
Press the arrow buttons until Power Saver appears, and then press
7
Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver
mode. Available settings range from 1–240 minutes.
.
.
.
Minimizing your printer's environmental impact
To
Reduce printer noise.
You may notice a reduction in processing speed.
•
Printer engine motors do not start until a job is ready to
•
print. You may notice a short delay before the first page
is printed.
Fans run at a reduced speed or are turned off.
•
If your printer has faxing capability, fax sounds are
•
reduced or disabled, including those made by the fax
speaker and ringer.
Use factory default settings. This setting supports the
performance specifications for your printer.
.
.
.
.
.
36
.
.