Navigating Through The Setup Utility - HP ProLiant DL160 Generation 5 Maintenance And Service Manual

Navigating through the setup utility

Use the keys listed in the legend bar on the right of the Setup screen to navigate through the various
menu and submenu screens of the Setup Utility. Table 11 lists these legend keys and their respective
functions.
Table 11
Setup Utility Navigation Keys
Key
← and →
↑ and ↓
<+>, <–>
Enter
Esc
F1
F2, F3
F7
<Page Up> and
<Page Down>
<Home> and
<End>
Tab
F10
F9
Function
Move between selections on the menu bar.
Move the cursor to the field you want.
The currently selected field is highlighted. The right side of each menu screen displays
the Item Specific Help panel. This panel displays the help text for the selected field. It
updates as you move the cursor to each field.
Select a value for the currently selected field if it is user-configurable.
Press the (+) or (-) keys repeatedly to scroll through each value one at a time, or press the
Enter key to choose from a pop-up menu that displays all possible values at once.
A parameter that is enclosed in square brackets [ ] is user-configurable.
Grayed-out parameters are not user-configurable for one of the following reasons:
•
The field value is auto-configured or auto-detected.
•
The field value is informational only.
•
The field is password-protected.
To select a field value or display a submenu screen.
Displays more option for items marked with
If you press this key:
•
On one of the primary menu screens, the Exit menu displays.
•
On a submenu screen, the previous screen displays.
•
When you are making selections from a pop-up menu, the pop-up closes without
making a selection.
To bring up the General Help window.
The General Help window describes other Setup navigation keys that are not displayed
on the legend bar.
To change BIOS Setup Utility screen colours.
Discard any changes you have made.
Moves the cursor to the first/last item (each menu), the item will be display highlight.
Moves the cursor to the first/last item (each menu), the item will be display highlight.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field
To save changes and close the Setup Utility.
To load the Optimal Defaults.
Contents 80