HP ProLiant DL160 Generation 5 Maintenance And Service Manual page 75

Figure 65 Hot-plug power supply unit
To remove the hot-plug power supply:
Disconnect the power cable connecting the hot-plug power supply and the mother board.
1.
Press the purple colored handle.
2.
Slide the hot-plug power supply out of the power supply bay.
3.
Figure 66 Removing the hot-plug power supply
To replace the hot-plug power supply:
Align the hot-plug power supply cage connector with the open slot of power supply, and slide
1.
the hot-plug power supply into the power supply bay until it snaps into place.
Snap the latch cover over port colored handle. Latch cover only installs one way.
2.
Contents 75