C: Placing Transparent Films; Using The Universal Glass Film Holder - Microtek ScanMaker 4 User Manual

C. Placing transparent film
There are two ways to scan transparent film:
• By using the Universal Glass Film Holder for
scanning non-standard-sized transparent film.
• By using the Main Holder together with the
individual templates for scanning a particular
type of standard-sized transparent film, such as
6 x 9 cm film, 4" x 5" film, individual 35mm
slides, or 35mm filmstrips.
Main Holder
a) 35mm Batch Slide Holder
b) 35mm Filmstrip Holder
c) 6 x 9 cm Batch Film Holder
d) 4" x 5" Batch Film Holder

Using the Universal Glass Film Holder

1. To scan non-standard-sized transparent film,
place the film on top of the glass surface of the
film holder against the glass.
2. Place the vinyl strip on the edges outside of your
transparency.
3. Place the Universal Glass Film Holder into the
transparency tray of ScanMaker 4.
15