2. Tilt the scanner up, and locate the locking screw
at the bottom of the scanner. To lock, turn the
locking screw clockwise one-fourth turn while
pushing it in simultaneously. The screw should
stay in and not pop back out.
Lamp Replacement
The lamp inside your scanner is not user serviceable
and should be replaced if it does not come on or
begins to flicker/dim after some time.
If the lamp requires replacement, call Microtek
Technical Support to get a Repair Merchandise
Authorization (RMA) number, and send the scanner
in for lamp replacement. Outside the U.S. and
Canadian, call your authorized Microtek dealer for
lamp replacement.
19