Operation - Dimplex DF2426GB Owner's Manual

Fireplace Installation
9. Place all connectors inside
the unit and secure the
junction box cover to unit.
Ensure that the cable clamp
grips only the jacket of
service cable.
CAUTION: Clearance for air
circulation beneath the fireplace
insert is provided by two (2)
rubber feet.

Operation

A. Main ON/OFF Switch
The switch has two on positions
marked. The " -- " position is
for manual operation. In this
position the built-in remote control
is by-passed. The " = " position
is for operating the unit with the
provided remote control. When
in remote control (" = ") position
the unit is operated with the ON
and OFF buttons of the remote
control.
When the switch is in the center
"o" position the unit is off.
10
CAUTION: Do not install the
fireplace directly on carpet or
similar surfaces which may
restrict air circulation.
!
NOTE 1:If installing the
fireplace in a carpeted area, place
a one-piece, solid, flat surface
under the fireplace insert. Ensure
that both of the insert's feet rest
securely on this surface.
B. Heater ON Switch
The Heat on/oFF switch
supplies power to the heater
fan and the heater element.
When the switch is in the on
position the heater operates if the
thermostat calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your
individual requirements, turn the
thermostat control clockwise all
the way to turn on the heater.
When the room reaches the
desired temperature, turn
www.dimplex.com