Network Card Removal - Lexmark 7003-050 X340n Service Manual

Network card removal

1.
Remove lower right side cover. Go to
2.
Remove the card cage. Go to
3.
Disconnect the ground wire connecting the network card to the controller card.
4.
Remove the screw that secures the network card to the rear plate on the MFP frame.
Note: When reattaching the network card, attach the card to the rear plate and stand off before inserting
the 4 connecting pins into J44 on the controller card.
5.
Carefully remove the network card from the MFP.
"Lower right side cover removal" on page
"Card cage removal" on page
manuals4u.com manuals4u.com
4-10.
4-12.
Repair information
7003-XXX
4-29