Advertisement
CONNECTING TO THE
PHONE LINE
Note: The phone company can charge you for the instal-
lation of the necessary jacks. The USOC number of the
jack to be installed is RJ11C.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important
operating
instructions included in the papers with
the telephone.
USING THE PHONE
Press
FLASH
such as call waiting. Note: If you do not subscribe to any special services,
pressing
FLASH
Switch to
have. If you have pulse (rotary) service, you can press
during a call to use tone services.
Press and hold
someone in the room without being overheard by the
person on the phone.
Set the ringer to sound or not. You can make
calls with the ringer off, and you can receive
calls if you see the ringer indicator light or hear
another phone on the same line ring.
Use the index card to record your important numbers.
and
servicing
Switch to
T
(tone) or
P
(pulse) to match the type of service you have.
to produce a timed switchhook signal for special services
might disconnect the call.
TONE
or
PULSE
to match the type of service you
MUTE
to carry on a conversation with
Press to disconnect a call.
©
RadioShack is a registered trademark used by Tandy Corporation.
TONE
Plug the handset cord into the jacks on the handset and base.
ÐÐ
1997, 1999 Tandy Corporation.
All Rights Reserved.
Ringer indicator (on the
back of the handset).
Press
to dial the last
REDIAL
number dialed (up to 31 tone
or 32 pulse digits).
Advertisement
