Table of Contents
Advertisement
43-726.fm Page 7 Tuesday, June 15, 1999 8:36 AM
INSTALLATION
MOUNTING THE PHONE
You can place the TAD-726's base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a modular telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the phone's
range. If you have a choice of several lo-
cations, try each to see which provides
the best performance.
Caution: You must use a Class
!
2 power source that supplies 9
volts DC and delivers at least
350 mA. Its center tip must be set to
positive and its plug must fit the TAD-
726's
jack. The supplied adapt-
DC IN 9V
er meets these specifications. Using an
adapter that does not meet these speci-
fications could damage the TAD-726 or
the adapter.
Notes:
• Your telephone connects directly to
a modular telephone line jack. If
your phone line jack is not a modu-
lar jack, you can update the wiring
yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can let the phone
company update the wiring for you.
• The USOC number of the jack to be
installed is RJ11C (RJ11W for a wall
plate).
On a Desk Top
1. Plug one end of the supplied long
modular cord into the
on the back of the base.
2. Plug the modular cord's other end
into a modular telephone line jack.
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
4. Route the adapter's cord through
the strain relief slot on the bottom of
the base.
jack
TEL LINE
jack on
DC IN 9V
7
Advertisement
Table of Contents
