Preparing Your Phone; Mounting The Phone - Radio Shack 43-208 User Manual

Preparing Your Phone

1. Peel the plastic label from your phone's display before using your phone.
2. Connect the supplied AC adapter to the DC 9V 200mA jack and a
standard AC outlet.
3. Plug one end of the supplied modular cord into the TEL. LlNE jack (RJ11)
on the back of the phone. Plug the other end into a modular phone line
jack.
4. Plug one end of the supplied coiled cord into the jack on the left side of
the phone. Plug the other end into the modular jack on the handset.

Mounting the Phone

You can place your phone on a flat surface or mount it on a telephone wall
plate (not included). To mount it on the wall:
1. Connect one end of the short phone
cord to the telephone wall plate and the
other the telephone.
2. Insert the supplied mounting bracket
into the slots on the back of the phone
and push the bracket up until it clicks.
To detach the bracket, press the tab and
slide down the bracket.
3. Insert the two keyhole slots on the
phone with the wall plate and slide the
phone down, being careful not to pinch the
telephone line.
4. Slide out the tab in the phone's cradle and
rotate the tab 180 degrees. Then insert it
back to hold the phone in the cradle.
DC 9V jack
TEL. LINE jack
Tab

Wall plate
Mounting
Tab
bracket