Advertisement
MOUNTING THE PHONE
Desk Mounting
Handset Cord
(coiled)
Wall Mounting
(With or Without Wall Plate)
(Screws not supplied)
Handset Holder
Wall Plate
Handset Cord
(coiled)
Note: The USOC number of the jack to be installed is
RJ11C (RJ11W for a wall jack).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important
operating
instructions included in the papers with
the telephone.
USING THE PHONE
Switch to
vice you have. If you have pulse service, you can
switch to
Press to end a call.
(Wall Mounting)
1. Pull Up
2. Rotate
Switch
can still make calls with the ringer off.
Press to dial the last number dialed
(up to 31 tone or 32 pulse digits).
and
servicing
or
to match the type of ser-
TONE
PULSE
TONE
during a call to use tone services.
Press for special services.
RINGER
to
ON
or
OFF
. You
Press to end a call (so you
can make another) without
hanging up the handset.
RadioShack is a registered trademark used by Tandy Corporation
© 1998 Tandy Corporation.
All Rights Reserved.
Press
FLASH
to produce a
switchhook sig-
nal for special
services (for
example, call
waiting).
Plug the handset cord
into the jacks on the
base and handset.
Advertisement
