Advertisement
INSTALLING THE PHONE
Modular Telephone
Jack
Note: The USOC number of the jack to be installed is
RJ11C.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to inform you
that parts inside the telephone present
a risk of electric shock.
This symbol is intended to alert you to
important
operating
instructions included in the papers with
the telephone.
USING THE PHONE
Set the ringer to sound or not to sound.
You can make calls with the ringer off, and
you can receive calls if you hear another
phone ringing on the same line.
Press
switchhook signal for special ser-
vices such as Call Waiting.
Note: If you do not subscribe to
any special services, pressing
FLASH
Press
NEW CALL
hang up the current call, and get a
dial tone to make a new call.
Open the cover to make or receive
calls. Close the cover until it clicks
to hang up.
and
servicing
Switch to
TONE
type of service you have. If you have
pulse (rotary) service, you can switch to
during a call to use tone services.
TONE
to produce a timed
FLASH
might disconnect the call.
(switchhook) to
RadioShack is a registered trademark used by Tandy Corporation.
Adjust the handset volume to a com-
fortable listening level —
MED
(medium), or
Side of Telephone
or
PULSE
to match the
Press
ber dialed (up to 31 tone or 32 pulse
digits).
Use this card to record important
numbers.
© 1999 Tandy Corporation.
All Rights Reserved.
LO
(low),
HI
(high).
REDIAL
to dial the last num-
Advertisement
