Installing The Scrambler Board - Kenwood TK-7100H Service Manual

18 Scrambler

18.1 Installing the Scrambler Board

1 Remove the cabinet (A01-2181-X1) and packing (G53-1544-X1), then unscrew the 8 screws (N87-2614-X6,
M2.6) holding the cover.
2 Remove the cover (F10-2499-X1).
3 Remove resistors R267 and R202 from the TX/RX board.
Remove
R202
Remove
R267
Schematic Diagram Shown
61