Table of Contents
Advertisement
12 Self Proguamming Mode
You can program the Scrambler Code from 1 to 16.
•
The above display appears when setting the
Scrambler Code to 1.
•
The above display appears when setting
Scrambler Code to 16.
Note: You cannot use the [ ] key for this configuration.
12.2.2 ID Set Mode
Press the [SCN] key while "SELF" appears on the
display to enter the ID Set Mode.
In this mode, you can program the DTMF ID for the
DTMF Decode using the Keypad Microphone
(KMC-32).
The current DTMF ID appears (000 in this example)
when the transceiver enters the ID Set Mode.
• Press the [MON] key or the [ ] key to return to the
main display ("SELF" appears) without storing the
data.
• Press the [SCN] key to store the changes in the
configuration data and return to the main display
("SELF" appears).
• Press the [ ] key to display the default DTMF ID
"000".
Enter the code using the keypad.
38
Advertisement
Table of Contents
