Table of Contents
Advertisement
18 Scrambler
18.2 Configuring the Function Port of the Scrambler Board
1 Select "Edit > Function Port" in the FPU Menu.
2 Select Scrambler for the External Devices to assign functions to each port for operating the Scrambler board.
3 Select "Program > Write to Radio" in the FPU Menu.
4 The configuration data is sent to the transceiver.
Note: You must enable/ disable the Scrambler function and program the Scrambler code for each Channel.
Note: You can change the Scrambler configuration using the Scrambler key.
66
Select Scrambler.
All necessary parameters for the
Scrambler are automatically
configured.
Advertisement
Table of Contents
