Replacing A Turn Signal Light Bulb; Replacing A License Plate Light Bulb - Yamaha VMAX VMX17 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1. Screw
6
2. Turn signal light lens
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24204
1. Turn signal light bulb
2
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing a license plate light
bulb
1. Remove the holding plate by re-
1
1. Holding plate
2. Bolt
2. Remove the license plate light unit
[ECA11191]
6-37
moving the bolts.
bolts.
EAU50451
2
1