Yamaha VMAX VMX17 Owner's Manual page 30

INSTRUMENT AND CONTROL FUNCTIONS
Select mode again by pushing and
holding "SELECT" and "RESET" for at
least three seconds.
Checking and resetting the system sta-
tus
The status/readings of the following
items are displayed, and the tripmeters
3
can be reset.
●
tripmeters and odometer
●
fuel consumption
●
air intake temperature
● throttle opening position
TIP
● The "System status" menu cannot
be entered if the fuel level warning
light or coolant temperature warn-
ing light is on.
● If, when the engine is running
while the system status menu is
displayed, the fuel level warning
light or coolant temperature warn-
ing light comes on, the Normal
mode is automatically displayed.
1. Push "SELECT" to highlight "Sys-
tem status", then push "RESET".
2. Push "SELECT" to highlight "Yes",
then push "RESET". (Highlighting
"No" and pushing "RESET" returns
to the previous menu.)
The display changes to the status
screen.
3-15
1 2
6 5
1. Odometer/tripmeter/fuel reserve tripmeter
2. Clock
3. Instantaneous fuel consumption
4. Throttle opening position display
5. Transmission gear indicator
6. Air intake temperature display
Push "SELECT" and the various trip-
meters and the odometer are displayed
in the following order:
(TRIP-F) → TRIP-1 → TRIP-2 → ODO
→ (TRIP-F)
Push "RESET" to reset a tripmeter.
TIP
● For the U.K. only: Push "SELECT"
for at least two seconds to switch
between kilometers and miles.
3
4