Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha WR25R 2008 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
1
have a Yamaha dealer check it.
2
3
4
5
6
7
8
9
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
1. Screw
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
7-37
EAU43002
1
1. Turn signal light unit
2. Turn signal light bulb socket
3. Remove the burnt-out bulb by pull-
1
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
2
[ECA11191]