Yamaha VMAX VMX17 Owner's Manual page 25

coolant temperature warning indicator
flash, stop the vehicle and let the en-
gine cool. (See page 6-42.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Select mode
The various functions of this multi-func-
tion display are adjusted in the Select
mode.
TIP
● The transmission must be in neu-
tral to change settings in this
mode.
●
Shifting the transmission into gear
saves all settings made, then can-
cels the Select mode and displays
the Normal mode in all screens.
●
Depending on the screen, pushing
"RESET" saves settings or can-
cels the Select mode to display the
Normal mode.
Push and hold "SELECT" and "RESET"
for at least three seconds to enter the
Select mode.
INSTRUMENT AND CONTROL FUNCTIONS
ECA10021
The following items can be set/adjusted
in this mode:
●
brightness
● shift timing indicator light
● clock
● stopwatch
●
countdown clock
●
system status
●
maintenance counters
TIP
To return to the Normal mode, push
"SELECT" to scroll to " ", then push
"RESET".
Adjusting the brightness
This function allows you to adjust the
brightness of the tachometer panel and
speedometer ("Meter panel"), the ta-
chometer needle ("Needle"), and the
multi-function display ("Display") to suit
the outside lighting conditions.
1. Push "SELECT"
"Brightness".
2. Push "RESET", then push "SE-
3. Push "RESET"; the brightness lev-
4. Push "SELECT" to highlight the
5. Push "RESET" to set the bright-
6. Push "SELECT" to scroll to " ",
to highlight
3-10
LECT" to scroll through the func-
tions and to highlight an item.
el segments for the selected item
starts flashing.
desired brightness level.
ness level.
then push "RESET" to return to the
previous menu.
3