Yamaha VMAX 2009 Service Manual page 535

Fault code No. ABS-16
Order Item/components and probable
cause
2 Wire harness continuity.
ABS (ANTI-LOCK BRAKE SYSTEM)
Symptom No continuity in the rear wheel sensor circuit.
Check or maintenance job
• Check for continuity between
the white terminal "1" and the
white terminal "3" and between
the black terminal "2" and the
black terminal "4".
• If there is no continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
• Check that there is no continuity
between the ground and the
white terminal "1" or white ter-
minal "3" and between the
ground and the black terminal
"2" or black terminal "4".
• If there is continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
• Check that there is no continuity
between the white terminal "1"
and the black terminal "2" and
between the white terminal "3"
and the black terminal "4".
• If there is continuity, the wire
harness is defective. Properly
repair or replace the wire har-
ness.
2
B/W
Lg/W B/L B
B
Lg/L
5. ABS ECU
6. Rear wheel sensor
8-102
1
4 3
B W Ch L/W W/Y Br/R
W G/R
Br
Y L/W Ch G/Y R/L B W W Gy
5 6
Reinstatement
confirmation
method