Yamaha VMAX 2009 Service Manual page 37

2. Push "RESET".
3. Push "SELECT" to highlight "Operation se-
lection".
4. Push "RESET".
Push "SELECT" and highlight "On" to activate
the indicator light; the indicator light comes on
and stays on when activated.
Push "SELECT" and highlight "Flash" to acti-
vate the indicator light; the indicator light
flashes when activated.
Push "SELECT" and highlight "Off" to deacti-
vate the indicator light; the indicator light nei-
ther comes on nor flashes.
TIP
The indicator light flashes once every two sec-
onds to show that it has been deactivated. The
indicator light goes off after this menu is exited.
5. Push "SELECT" to scroll to "
"RESET" to return to the previous menu.
Setting the r/min in relation to the shift timing in-
dicator light
This function allows you to select the engine
speed at which the indicator light is activated
and deactivated. All gears can be set to the
same activation/deactivation r/min or the gears
can be set individually.
Push "SELECT" to highlight "r/min setting", then
push "RESET".
TIP
The shift timing indicator light can be set to acti-
vate and deactivate between 3000 r/min and
11000 r/min in increments of 500 r/min.
To set all gears to the same r/min:
1-28
FEATURES
", then push