[A] Checking The Abs Warning Light; [B-1] The Abs Warning Light Fails To Come On; [B-2] The Abs Warning Light Flashes; [B-3] The Abs Warning Light Remains On - Yamaha VMAX 2009 Service Manual

EWA2S31022
WARNING
When maintenance or checks have been performed on components related to the ABS, be sure
to perform a final check before delivering the vehicle to the customer. (Refer to "[D-3] FINAL
CHECK" on page 8-123.)
EAS27830

[A] CHECKING THE ABS WARNING LIGHT

Turn the main switch to "ON". (Do not start the engine.)
1. The ABS warning light does not come on. [B-1]
2. The ABS warning light flashes. [B-2]
3. The ABS warning light remains on. [B-3]
4. The ABS warning light comes on for 2 seconds, then goes off. [B-4]
EAS2S31065

[B-1] THE ABS WARNING LIGHT FAILS TO COME ON

1. Only the ABS warning light fails to come on when the main switch is turned to "ON". [C-1]
2. The ABS warning light and all other indicator lights fail to come on. [C-2]
EAS2S31066

[B-2] THE ABS WARNING LIGHT FLASHES

1. Test coupler adapter
• Check if the test coupler adapter is connected to the ABS test coupler.
• If the test coupler adapter is connected, disconnect it, and then install the protective cap onto the
ABS test coupler.
• If the test coupler adapter is not connected, refer to "[B-5] MALFUNCTION ARE CURRENTLY DE-
TECTED" on page 8-91.
EAS2S31067

[B-3] THE ABS WARNING LIGHT REMAINS ON

1. A malfunction is detected. [B-6]
EAS2S31068

[B-4] THE ABS WARNING LIGHT COMES ON FOR 2 SECONDS, THEN GOES OFF

Remove the left side cover to access the ABS test coupler "1". Remove the protective cap from the ABS
test coupler, and then connect the test coupler adapter "2" to the coupler. The T/C terminal (green/yel-
low) is now grounded.
1. The fault code "1" is displayed on the multi-function display (example: fault code ABS-16).
ABS (ANTI-LOCK BRAKE SYSTEM)
1
2
8-90