Instrument Functions - Yamaha VMAX 2009 Service Manual

EAS2S31097

INSTRUMENT FUNCTIONS

1. Multi-function display
EWA2S31030
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
display. Changing settings while riding can
distract the operator and increase the risk of
an accident.
A "SELECT" button and a "RESET" button are
located on the handlebar holder. These buttons
allow you to control or change the settings in the
multi-function display.
1
1. "SELECT" button
2. "RESET" button
The multi-function display is set to the Normal
mode every time the key is turned to "ON".
Normal mode
The following functions are available in the Nor-
mal mode:
• an odometer (which shows the total distance
traveled)
• a clock
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the dis-
tance traveled since the fuel level warning indi-
cator started flashing)
• a fuel meter
1
2
• a transmission gear indicator
• a coolant temperature display
• a self-diagnosis device
1
4
1. Odometer
2. Clock
3. Trip/Fuel
4. Fuel meter
5. Transmission gear display
6. Coolant temperature display
TIP
For the U.K. only
The speedometer and odometer/tripmeter dis-
plays can be switched between miles and kilo-
meters. To switch the speedometer and
odometer/tripmeter displays, press "SELECT"
for at least two seconds.
Tripmeters
Turn the key to "ON". Push "SELECT" to switch
the display between the tripmeters "TRIP-1" and
"TRIP-2" in the following order.
TRIP-1 → TRIP-2 → TRIP-1
When the fuel amount in the fuel tank decreases
to 3.9 L (1.03 US gal, 0.86 Imp.gal), the fuel
warning indicator starts flashing, and the tripme-
ter automatically changes to the fuel reserve trip-
meter "TRIP-F" and starts counting the distance
traveled from that point. In that case, push "SE-
LECT" to switch the display between the various
tripmeters in the following order:
TRIP-F → TRIP-1 → TRIP-2 → TRIP-F
To reset a tripmeter, select it by pushing "SE-
LECT", and then push "RESET" for at least one
second. If you do not reset the fuel reserve trip-
meter manually, it resets itself automatically and
the display returns to the prior meter after refuel-
ing and traveling 5 km (3 mi).
Select mode
The various functions of this multi-function dis-
play are adjusted in the Select mode.
1-26
FEATURES
2 3
6
5