Four Slot Spare Battery Charger; Four Slot Ethernet Cradle - Motorola WT4070 Integrator Manual

10 - 10 WT4070/90 Wearable Terminal Integrator Guide

Four Slot Spare Battery Charger

Troubleshooting The Four Slot Spare Battery Charger
Table 10-2
Symptom
Batteries not
charging.

Four Slot Ethernet Cradle

Troubleshooting the Four Slot Ethernet Cradle
Table 10-3
Problem
Wearable terminal amber
Charge Status LED does not
light when wearable terminal
inserted.
Wearable terminal battery is
not charging.
Possible Cause
Battery was removed Re-insert the battery in the charger or re-connect the charger's power
from the charger or supply.
charger was unplugged
from AC power too
soon.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Battery contacts not Verify that the battery is seated in the battery well correctly with the
connected to charger. contacts facing down.
Ambient temperature of Move the charger to an area where the ambient temperature is
the charger is too warm between 0 °C and 40 °C.
or too cold.
Cradle is not receiving power.
Wearable terminal is not
correctly seated.
Wearable terminal was removed
from cradle or cradle was
unplugged from AC power too
soon.
Battery is faulty.
The wearable terminal is not
fully seated in the cradle.
Ambient temperature of the
cradle is too warm or too cold.
Cause
Ensure the power cable is connected securely
to both the cradle and to AC power.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly seated.
Ensure cradle is receiving power. Ensure the
wearable terminal is seated correctly.
Verify that other batteries charge properly. If
so, replace the faulty battery.
Remove and re-insert the wearable terminal
into the cradle, ensuring it is correctly seated.
Move the cradle to an area where the ambient
temperature is between 0 °C and 40 °C (32 °F
and 104 °F).
Solution
Solution