Motorola WT4070 Integrator Manual page 174

10 - 8 WT4070/90 Wearable Terminal Integrator Guide
Troubleshooting the Wearable Terminal (Continued)
Table 10-1
Problem
Wearable terminal turns
itself off.
A message appears
stating that the wearable
terminal memory is full.
(not applicable to voice
only configuration).
Cause
Wearable terminal is The wearable terminal turns off after a period of inactivity. If the
inactive. wearable terminal is running on battery power, this period can
be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the wearable
terminal is running on external power, this period can be set to
1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting
Control Panel
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Voice Only WT4090 Return Voice Only WT4090 suspend setting to factory default
was set to suspend. (disabled).
Battery is depleted. Replace or recharge the battery.
Battery is not inserted Insert the battery properly (see
properly. Main Battery on page
The wearable Replace or recharge the battery.
computer's battery is
low and it powers
down to protect
memory content.
Too many files stored Delete unused memos and records. You can save these
on the wearable records on the host computer.
terminal.
Too many applications If you have installed additional applications on the wearable
installed on the terminal, remove them to recover memory.
wearable terminal.
Select
icon.
Select the unused program and select Remove.
Solution
> icon >
Power Power Off
Installing and Removing the
1-4).
> >
Start Settings Control Panel
> >
Start Settings
tab.
>
Remove Programs