Advertisement
Installing the CN30 Charge Dock
Connect the DC power supply to the power connector on the charge dock. Connect the AC
power cord to an AC power outlet.
The CN30 Charge Dock is factory configured to charge a module in the charging bay. To
charge a battery in the charging bay, remove the module alignment clip and insert battery.
Do not discard the module alignment clip.
Module Alignment Clip
Remove to Charge Battery
Power
Connector
To prevent fire or electric shock, do not expose the CN30
Charge Dock to rain or moisture.
Avertissement: Pour éviter des risques d'incendie ou de choc
électrique, ne pas exposer le CN30 Charge Dock à la plui ou
l'humidité.
Installation
Physical Dimensions
Length:
20.32 cm (8 in)
Width:
11.43 cm (4.5 in)
Electrical Specifications
Electrical rating:
Temperature and Humidity Specifications
Charging temperature: +5°C to +35°C (41°F to 95°F)
Operating temperature: +0°C to +50°C (32°F to 122°F)
Storage temperature:
Relative Humdity, non-condensing 5%-95%
Patent Information
Product is covered by one or more of the following
patents: 5,052,943 ,5,195,183, 5,317,691, 5,331,580, 5,544,010, 5,644,471
There may be other U.S. and foreign patents pending.
CN30 Charge Dock Quick Start Guide
*962-000-060A*
P/N: 962-000-060A
Specifications
12 VDC, 4A
-30°C to +70°C (-22°F to 158°F)
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel
425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
Quick Start Guide
CN30 Model AD9 Charge Dock
Advertisement
