Intermec Z2400 Instructions

Specifications

Design and specifications are subject to change without notice.
Product
Intermec Z2400 battery charger
Input voltage: x 12V 1,7A
Electrical requirements
Application Intermec lithium-ion battery packs
(P/N 063278, 068537, 068868, 073152, or 073153)
Maximum voltage Battery P/N 063278, 068868, or 073153: 8,2V
+/- 125mV
Battery P/N 068537 or 073152: 8,4V +/- 125mV
Operating environment
Temperature: 0ºC to 40ºC (32ºF to 104ºF)
Humidity: 0 to 95%, non-condensing
Storage environment Temperature: -20ºC to 50ºC (-4ºF to 122ºF)
Humidity: 0 to 95%, non-condensing
Dimensions Approx. 51 x 102 x 178 mm (2 x 4 x 7 in)
Weight
Approx. 394.1g (13.79 oz) (without power supply)
Ordering Power Cords for the Battery Charger
The AC power cord is ordered separately. If you need to order an Intermec
power cord, contact your Intermec sales representative.
Country Part Number
North and Central America 586105
Europe 586267
Denmark and Greenland 586283
Italy and Chile 586282
Liechtenstein and Switzerland 586276
United Kingdom 586266
South Pacific 586281
China 071918
Z2400 4-Pack Battery Charger Instructions
*069994-005*
*069994-005*
(P/N 069991)
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2003 Intermec Technologies Corp.
All Rights Reserved
Z2400 4-Pack Battery Charger Instructions
®
Use the Trakker Antares Z2400 battery charger (P/N 069991) to simultaneously
charge up to four battery packs for the Trakker Antares 242X and 243X hand-
held terminals or the 502X Data Collection PC.
This guide describes how to install and use the charger. Before using the charger,
please read this guide thoroughly and retain it for future reference. For help
managing battery power, see your Trakker Antares 242X terminal, Trakker
Antares 243X terminal, or 502X Data Collection PC user's manual.
Choosing a Location for the Battery Charger
Warning
To prevent fire or electric shock, do not expose the battery
charger to rain or moisture.
Avertissement
Pour éviter des risques d'incendie ou de choc électrique, ne
pas exposer le chargeur de la batterie à la pluie ou à
l'humidité.
Choose an appropriate location for the charger using these guidelines:
•
Locate a flat, stable, and clean surface that is within 1.5 m (5 ft) of an
electrical source (AC outlet).
•
Provide access to the power supply jack on the battery charger and to the
battery charger itself so you can easily load and unload batteries.
Connecting the AC Power Supply
Before you can use the battery charger, you need to connect an autoranging AC
power supply (P/N 065236). Plug the AC power supply connector into the power
supply jack on the battery charger, and then connect the AC power cord to the
power supply and to an AC outlet. Both the power supply and the AC power
cord are ordered separately. For help determining which AC power cord to
order, see "Ordering Power Cords for the Battery Charger" later in this guide.
P/N 069994-005