ZyXEL Communications P-660HW-Tx v3 Support Notes page 54

The following table describes the fields in this screen.
Field Description
You can select one of the five mapping types from the
Type
pull-down menu
Start This is the starting local IP address (ILA)
This is the ending local IP address (ILA). If the rule is
Local
for all local IPs, then put the Start IP as 0.0.0.0 and the
IP
End
End IP as 255.255.255.255. This field is N/A for
One-to-One type.
This is the starting global IP address (IGA). If you have
Start
a dynamic IP, enter 0.0.0.0 as the Global Start IP.
Global
This is the ending global IP address (IGA). This
IP
End
field is N/A for One-to-One, Many-to-One and Server
types.
Note: For all Local and Global IPs, the End IP address must begin after the IP
Start address, i.e., you cannot have an End IP address beginning before the
Start IP address.

Configure Address Mapping Sets in CLI
Setp 1: Telnet to the P-660HW-Tx v3. (We suppose the LAN IP Address of
P-660HW-Tx v3 is 192.168.1.1)
Step 2: Select one Address Mapping Set (#1~#8) by command „ip nat
addrmap map [map #] [set name]‟ (set name is optional). Suppose we
configure set 2 in the example.
All contents copyright © 2008 ZyXEL Communications Corporation.
P-660HW-Tx v3 Series Support Notes
Option/Example
1. One-to-One
2. Many-to-One
3. Many-to-Many
Overload
4. Many-to-Many No
Overload
5. Server
0.0.0.0
255.255.255.255
0.0.0.0
200.1.1.64
54