ZyXEL Communications P-660HW-Tx v3 Support Notes page 40

Set up your P-660HW-Tx v3 under routing mode
The following procedure shows you how to configure your P-660HW-Tx v3 as
Routing mode for routing traffic. We will use Web Configurator to guide you
through the related menu.
(1) Configure P-660HW-Tx v3 as routing mode and configure Internet setup
parameters in Web Configurator, Advanced Setup, Network -> WAN ->
Internet Connection.
Key Settings:
Option Description
Select the correct Encapsulation type that your ISP supports. For
Encapsulation
example, RFC 1483.
Select the correct Multiplexing type that your ISP supports. For
Multiplexing
example, LLC.
VPI & VCI Specify a VPI (Virtual Path Identifier) and a VCI (Virtual Channel
number Identifier) given to you by your ISP.
Set to Dynamic if the ISP provides the IP for the P-660HW-Tx v3
IP Address
dynamically. Otherwise, set to Static and enter the IP in the IP
Assignment
Address field.
All contents copyright © 2008 ZyXEL Communications Corporation.
P-660HW-Tx v3 Series Support Notes
40