Fog lights and daytime running lights
Fig. 161 Front bumper: Protective grille/removing the fog light
Read and observe
and
Bulb location
» Fig.
161.
- Bulb for daylight driving light
A
- Light bulb for fog lights
B
Removing the cap
›
Grasp the protective grille in the areas marked by the arrows
and remove the cover in the direction of the arrow.
Replacing light bulbs for fog lights/daytime running lights
›
Insert your hand into the opening in the protective grille and press the
catch
» Fig. 161
- in the direction of the arrow.
›
Remove the fog lamp.
›
Turn the connector with the bulb in counter-clockwise up to the stop and re-
move.
›
Replace the bulb, insert the holder with the new bulb and turn clockwise to
the stop.
›
To re-install the fog light, first of all place the fog light with the lug on the
side opposite the licence plate.
›
Press in the fog lamp on the side closest to the licence plate.
›
Insert the cap, beginning with the lug on the side opposite the license plate.
›
Press in the cap on the side facing the license plate. The cap must engage
firmly.
on page 171 first.
» Fig. 161
Fog light, Roomster Scout
-
Fig. 163 Front bumper: Fog lights/fog lights: Replacing the light bulb
Read and observe
Removing the cap and fog light
›
Insert the tool
» page
light
» Fig. 162
and remove the cover.
›
Unscrew the screws
tool kit.
›
Remove the fog lamp.
Changing light bulbs and installing fog lights
›
Press the locking tab
nector from the bulb holder
›
Turn the bulb holder
remove.
›
Replace the bulb, insert the bulb holder and new bulb and turn in the oppo-
site direction to that of the arrow to the stop.
›
Insert the plug
into the socket
A
Fig. 162
Front bumper: Roomster Scout
and
on page 171 first.
159, Vehicle tool kit into the opening above the fog
» Fig. 163
- with the screwdriver
» Fig. 163
on the connector
1
A
.
B
and bulb in the direction of the arrow to the stop and
B
.
B
Fuses and light bulbs
» page
159, Vehicle
and remove the con-
173