Dražice OKC 200 NTRR Operation And Installation Manual page 19

Technical Data
Mini potentiostat CORREX
Function
Mains power supply
Indicators
Display
Operation
Casing
Titanium electrode CORREX
Function
Bolt with thread
Dimensions of electrode
in the part filled with
water(Basic MP version)
Assembly options
See a separate manual for more details on titanium anode, available on http: //www.dzd.cz

MP
Potentiostat with a plug for cathode anticorrosion protection of enamelled
electric water heaters (intermitting potentiostat with controlled regulation
of protective current potentiostat) with an integrated function indication
with red/green LED control lights.
Voltage:
Frequency:
Power input:
Required potential:
Impulse frequency:
Intermittence:
Rated current (secondary):
Supply voltage (secondary):
Two LEDs , 5 mm diameter
Temperature range (Potentiostat):
IP protection:
Dimensions (without Euro socket
plug):
Weight (without anode cable)

Supply and referential electrode with a coating of noble metal oxides;
supply with protective current without wear; referential electrode to
measure the actual potential in the accumulator
M8 x 30
Diameter:
Length:
Coating length:
Fitting into the sleeve
Fitting into an insulated hole
230 V ± 10 %
50/60 Hz
< 4 VA
2,3 V ± 50 mV
100 Hz
200 µs
100 mA
max. 10,6 V at 100 mA
green: followed by protective
current supply
red: failure neither is on: no
power supply
0...40 °C
II, (operation in closed rooms)
L x W x H = 80 x 50 x 45 mm
approx. 160 g
2 mm
200 mm
100 mm
13-7-2015
- 19 -