Copying
Staple
Each copy set can be stapled together.
If a finisher is installed, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
2
Important
❒ You cannot use the bypass tray with this function.
❖ Stapling position and original setting
Place all the originals in the ARDF in the orientation in which they can be read nor-
mally. When placing the original on the exposure glass, keep the same orientation,
but set the original facing downwards. When there is copy paper that is identical
in size and orientation to your original, the staple positions are as follows:
❖ 500-sheet finisher
*1
This table shows the stapling positions, not the orientation of delivery.
*2
Left 2K and Top 2L are not available for larger than A4 size paper.
*3
It is recommended to use this function together with the [Auto Paper Select] or [Auto
Reduce/Enlarge] function.
50
AZB015S