Ricoh VD0107571 Operating Instructions Manual page 29

D
Select [Custom Size] using {U} or {T}, and then press the {OK} key.
E
Enter the horizontal size of the original (Horiz.) with the number keys, and
then press the {OK} key.
F
Enter the vertical size of the original (Vert.) with the number keys, and then
press the {OK} key.
The "
Programmed
When the custom size originals settings are registered,
on the top of the copy display.
Note
❒ This function is not available in Auto Paper Select mode.
❒ If you make a mistake in step
enter the value again.
❒ To cancel the size you have set, press the {Clear Modes} key.
" message appears.
E
or
F , press the {Clear/Stop} key, and then
Placing Originals
1
appears
19