Programming Channels Into The Tv's Channel Memory - Toshiba 32L255 Series Owner's Manual

Changing the position
Enter the desired position number using the
Number buttons on the remote control.
You can also change the position by using PU or Pu.
The position will be displayed on the screen.
NOTE:
Changing positions between diff erent format channels
takes several seconds.
Displaying the on-screen information
To display on-screen information such as channel,
input mode or stereo/mono signal, press
again to cancel.
Programming channels into the TV's channel
memory
• First, use the Auto Tuning function to preset all
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual Tuning function so that you can tune into
only desired channels.
• Use the Manual Tuning operation if desired
channels cannot be preset with the Auto Tuning
or if you would like to preset channels to specifi c
position numbers one by one.
Auto Tuning
1
From the SETUP menu, press  or  to select
Auto Tuning.
SETUP
Menu Language
Country
Clock Setup
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
2
Press OK.
The Auto Tuning menu will appear.
Auto Tuning
Tuning Mode
Scan Type
Auto Signal Booster
16
32405055L2550_EN.indd 16 32405055L2550_EN.indd 16
Introduction / Getting started
. Press
English
Singapore
DTV and ATV
Quick Scan
On
Start Scan
Press or  to select Tuning Mode, Scan Type
or Auto Signal Booster and press  or  to
select an option.
Tuning Mode:
Press  or  to select DTV and ATV, DTV or
ATV.
Scan Type (only for Tuning Mode DTV and ATV
or DTV mode):
Press  or  to select Quick Scan or Full Scan.
The Quick Scan is a simplifi ed version of the
Full Scan that is designed to complete in less
time.
NOTE:
If you select Full Scan, it takes a long time.
Auto Signal Booster:
Press  or  to select On or Off . If the receiving
signal is weak/strong and the picture is noisy,
the picture may be improved when using this
function.
3
Press  to select Start Scan and press OK.
The television will start to search for all available
DTV and/or ATV services.
You must allow the television to complete
the search.
When the search is complete, the Auto Tuning
result screen will display the services found.
ATV Manual Tuning
1
From the SETUP menu, press  or  to select
ATV Manual Tuning.
2
Press OK to display the ATV Manual Tuning
menu.
Press  or  to select the programme position
you want to arrange.
ATV Manual Tuning
Pos. Label
0
1 ABCD
2 EFGH
3 IJKL
4 MNOP
5
6
7
27/02/02 15:40:08 27/02/02 15:40:08