Things To Know; The Battery Charger - Functioning Principle; The Batteries - KYMCO Mini LS Opearting Manual

12.0 Things to know

12.1 The battery charger - functioning principle

The battery charger regulates the voltage (Volt) and
the current (Ampere) from your mains connection
down to the voltage required for charging your
batteries (24 Volt). The amount of charging current
required is dependent on the charging state of the
discharged batteries.
Batteries mostly discharged
Batteries half discharged
Batteries completely charged
Since no charging current is flowing when the batteries are full, the
batteries cannot be overloaded.

12.2 The Batteries

The entire power supply is
taken over by two cycle-
proof 12 V gel batteries.
The scooter can either be fitted
with 22 Ah(Amp-hour) batteries
Only enclosed maintenance-free
deep cycle batteries are used.
The batteries located in
the removable battery
case beneath the seat.
The 22 Ah batteries are located
in one battery case
The battery case fitted with 22 Ah
batteries is fitted with its own charging
socket. This means that it is possible
to charge the batteries when
separated from the scooter (Chapter
11.1.2).
Things to know
= more charging current
= decreased charging current
= no charging current
22 Ah x 2
39