Handlebar Installation - E-Wheels EW-18 Owner's Manual

HANDLE BAR INSTALLATION

1. First step will be to grab the bottom handle bar part and insert it on the top of the fork.(figure 1)

2. Once you have place the part into the front fork, you will use the 6mm Allen Wrench to secure the part into place.

Make sure you have the handle bar straight before tightening the bolt .(figure1)

3. After the bottom handle bar part is secure, insert the top handle bar part into the bottom handle bar part and secure

with the clamps .(figure 2)

Electric Wheels LLC-888-571-2845 (Toll Free)- 15855 N Greenway Hayden Loop -Suite 190, Scottsdale, AZ 85260

Table of Contents