• The equipment can be removed using the following procedure.
Set
Front cabinet assy
Note :
Follow the disassembly procedure in the numerical order given.
3-1.
FRONT CABINET ASSY
8 Vol knob
9 Tone knob
SECTION 3
DISASSEMBLY
Cabinet (upper) assy
Power, battery, half battery, voltage selection board
Control board
0 Front cabinet assy
6 Open the CD lid in
the direction of the arrow.
4 Three screws
+BVTP 3 × 12
Volume, lcd,
Mechanism deck, optical pick-up section
mono st, main board
7 Screw
+BVTP 3 × 12
5 Remove the Handle
2 Three screws
+BVTP 3 × 10
— 5 —
in the direction of the arrow.
Rear cabinet assy
3 Screw
+BVTP 3 × 10
1 Lid battery case