Advertisement

SERVICE MANUAL
Ver 1.1 1998. 08
With SUPPLEMENT 1 (9-923-320-81)
With SUPPLEMENT 2 (9-923-320-82)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 3.2-ohm, loads, both channels driven from 150 – 10,000 Hz ; rated
2W per channel-minimum RMS power, with no more
than 10% total harmonic distortion in AC operation. (US model)
Other Specification
CD player Section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration : Continuous
Laser output : Less than 44.6 µW
(This output is the value measured at a distance of about 200
mm from the objective lens surface on the optical pick-up
block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 – 20,000 Hz +1 /–2 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM : 87.6 – 108 MHz (US, Canadian,
Central & South America, E, Singapore model)
87.6 – 107 MHz (AEP, UK, Saudi Arabia,
Russian model)
87.5 – 108 MHz (Italian model)
65 – 108 MHz (East European model)
MICROFILM
CFD-V15/V24
Photo : CFD-V15
Model Name Using
Similar Mechanism
Optical Pick-up Type
Tape Transport Mechanism Type
SPECIFICATIONS
AM : 530 – 1,710 kHz (US, Canadian, Central & South
Aerials
FM: Telescopic aerial
AM : Built-in ferrite bar aerial
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 70 – l0,000 Hz
General
Speaker
Full range: 10 cm dia., 3.2 ohms, cone type (2)
Outputs
Headphones jack (stereo minijack)
For 16 – 68 ohms impedance headphones
Power output (excluding US model)
2.3 W + 2.3 W (at 3.2 ohms, 10% harmonic distortion)
CD RADIO CASSETTE-CORDER
US Model
Canadian Model
AEP Model
UK Model
CD Section
Tape Section
America model)
531 – 1,602 kHz (Singapore, E, Saudi Arabia, AEP,
UK, East European, Russian model)
526.5 – 1,606.5 kHz (Italian model)
– Continued on page 2 –
CFD-V15
CFD-V24
E Model
CFD-V15/V24
NEW
CFD-V10
KSM-213CDM
MF-V10-117

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CFD-V15 and is the answer not in the manual?

Questions and answers

Asbjørn Brevad
May 12, 2025

bytte sikring / change fuse Sony cfd - v14

2 comments:
Asbjørn Brevad
May 12, 2025

@Asbjørn Brevad

Mr. Anderson
May 20, 2025

To change the fuse in a Sony CFD-V15:

1. Unplug the unit from the wall socket.
2. If the plug has a detachable fuse cover, remove it.
3. Take out the blown fuse.
4. Replace it with a fuse of the same rating approved by ASTA or BSI to BS 1362.
5. Reattach the fuse cover. Never use the plug without it.
6. If the fuse cover is lost, contact a Sony service station.

This answer is automatically generated

This manual is also suitable for:

Cfd-v24

Table of Contents