Master Bilt TEL-2-30 Specification Sheet

TEL-4-30
(shown with
ends installed)
FEATURES
STANDARD TEXTURED FINISH
Standard
white
CONSTRUCTION
• Painted textured galvanized steel
cabinet
• 2" foamed-in-place "zero ODP"
urethane insulation
• A large heavy duty rub rail and kick
plate to protect from abuse
• Five white cantilever epoxy-coated
welded wire shelves with price tag
molding per door
• Shelves rated to support 110 lbs. each
• Product stop feature to prevent
product from falling behind shelves
• Ends must be ordered separately
• Standard LED lighting
• Pre-piped drain in bottom of each
section for cleaning purposes (with
removable plug)
DOORS
• Choice of 24" or 30" wide glass doors
• Self-closing door hinge with
adjustable torsion control
• Standard black door and frame
(optional colors available)
REFRIGERATION
• All models designed for remote
Black also
refrigeration systems
available
• Refrigerant: R-404A
• Factory tested refrigeration system
• Heavy-duty copper tube evaporator
coil
• Choice of electric or hot gas defrost
• Pre-mounted expansion valve
• Minimum 4" clearance required
between cabinet back and wall with
a 4" open space at top and one or
both ends
• Temperature ranges:
–TEM models: 34° to 41°F (1°to 5°C)
–TEL models: 0° to -15°F (18° to -26°C)
• R-factor (insulation efficiency
rating): 18.75
WARRANTY
• 2 year limited parts and 90 day labor
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
ITEM NO. __________________________________________________
PROJECT __________________________________________________
LOCATION _________________________________________________
DATE _________________________ QTY. _______________________
TEM/TEL SERIES
Endless Remote Glass Door
Merchandisers With
Top Mounted Coil
MEDIUM TEMP MODELS
(24" WIDE DOORS)
❑ TEM-3-24 ❑ TEM-5-24
❑ TEM-4-24 ❑ TEM-6-24
MEDIUM TEMP MODELS
(30" WIDE DOORS)
❑ TEM-2-30 ❑ TEM-4-30
❑ TEM-3-30 ❑ TEM-5-30
When ordering multi-cabinet
line-ups, please note:
• Pre-wired cabinet-to-cabinet electri-
cal terminal block connectors are
standard
• A 2" thick partition is required
between each endless module if:
– Each utilizes its own condensing
– One module is a freezer and one
• Joining kits for linking together
modules are standard
• Please allow an additional 1"
clearance for case and assembly
dimensional tolerance stack-up
OPTIONS
❑ Right or left hand end kits
❑ Custom colors
❑ Additional horizontal lighting
❑ Partitions
❑ Kickplate
❑ Additional 30" cantilever shelves
❑ Baskets
LOW TEMP MODELS
(24" WIDE DOORS)
❑ TEL-3-24 ❑ TEL-5-24
❑ TEL-4-24 ❑ TEL-6-24
LOW TEMP MODELS
(30" WIDE DOORS)
❑ TEL-2-30 ❑ TEL-4-30
❑ TEL-3-30 ❑ TEL-5-30
unit or
is a cooler