Table of Contents
Advertisement
WET:
Indicates the indoor humidity is high.
DRY:
Indicates the indoor humidity is low.
Weather station has missing segments
This is generally a power related issue.
Batteries
may be overpowered or underpowered. Remove batteries and A/C cord from weather
station.
Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
Insert the A/C power cord into the outlet first then into the weather station.
Alternatively, install fresh Alkaline batteries with correct polarity.
Weather station is dim
Battery Operation:
Most weather stations have a gray background. Place the weather station at eye level. Is it still dim?
Weather stations that sit in the sunlight can develop a cloudy film over time.
This is generally a power related issue.
Batteries
may be overpowered or underpowered. Remove batteries from weather station.
Press any button 20 times. Leave the weather station unpowered for 1-2 hours.
Install fresh Alkaline batteries with correct polarity.
A/C Power Operation:
Check that the A/C power cord connects correctly to the weather station and outlet.
If using batteries in the weather station as well, remove them and see if the weather station goes
blank, indicating a faulty A/C power cord.
Check the
backlight
intensity setting. The backlight can be on high, low or off.
Weather station has distorted display
On a brand new weather station, check for thin plastic films of printed scratch guard that may be on
the upper and lower screen of the weather station. This thin piece of plastic has printed numbers for
store displays.
With all power removed, the weather station should be blank.
If numbers still appear, please check for scratch guard.
Check that the batteries and A/C power cord connect correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries and A/C power cord from weather station.
Press any button 20 times. Leave the batteries and A/C power cord out of the display for 2 hours.
Insert A/C power cord into a good outlet first, then into the weather station.
Weather station display is frozen
On a brand new Weather station, check for thin plastic films of printed scratch guard that may be on
the upper and lower screen of the weather station. This thin piece of plastic has printed numbers for
store displays. This can make the weather station display appear "frozen".
With all power removed the weather station should be blank.
If numbers still appear, please check for scratch guard.
Check that the batteries and A/C power cord connect correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries and A/C power cord from weather station.
Press any button 20 times. Leave the batteries and A/C power cord out of the display for 2 hours.
Insert A/C power cord into a good outlet first, then into the weather station.
La Crosse Technology, Ltd.
Page 17
Advertisement
Table of Contents
