Hunter Type 2A Series Owner's Manual And Installation Manual page 15

9 • Completing Your Installation With a Multi Staked Light Fixture (Continued)
Note: Glass shade style and number of lights may vary.
9-6. To install each shade, first loosen the three thumbscrews.
9-7. Raise the shade to the light fixture. Tighten the thumbscrews
securely.
9-8. Install B10 candelabra-based light bulbs (60 Watt maximum each).
Note: In compliance with Canadian federal energy
regulations, this ceiling fan contains a device that
restricts its light output. Exceeding the wattage limit
marked on the MAX wattage sticker affixed to the
light socket(s) may result in fire hazard or improper
operation.
15
42886-01 • 01/28/11 • Hunter Fan Company
Thumbscrews
Steps 9-7 – 9-8
Shade
Bulb