Hunter 28676 Owners And Installation Manual
Type 2 models
Hide thumbs
Also See for 28676:
- Installation manual (1 page) ,
- Manual de installatión y operatión (15 pages) ,
- Parts manual (2 pages)
Advertisement
Table of Contents
- 1 Table of Contents
- 2 Preparing the Fan Site
- 1 1 Getting Ready
- 2 2 Installing the Ceiling Plate
- 3 3 Assembling and Hanging the Fan
- 4 4 Wiring the Fan
- 5 5 Installing the Canopy and Canopy Trim
- 6 6 Assembling the Blades
- 7 7 • Completing Your Installation with a
- 8 8 • Operating and Cleaning Your Ceiling
- 9 9 Troubleshooting
- Download this manual
See also:
Installation Manual
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42437-01
20100608
©2010 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 28676
Summary of Contents for Hunter 28676
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 42437-01 20100608 ©2010 Hunter Fan Co.
-
Page 2: Table Of Contents
9 • Troubleshooting . . . . . . . . . . . . . . . . . . . . 15 use a solid-state speed control with this fan. Use only Hunter speed controls. -
Page 3: Preparing The Fan Site
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. - Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42437-01 • 06/08/10 • Hunter Fan Company...
- Page 5 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Ceiling Plate Flat Washer 3” Wood Steps 2-3 – 2-6 Screw 42437-01 • 06/08/10 • Hunter Fan Company... -
Page 8: Assembling And Hanging The Fan
Low Profile 3-7. Raise the fan and align the slots in the canopy with the hooks on Washer the ceiling plate. 3-8. Place the slots over the hooks to hang the fan. 42437-01 • 06/08/10 • Hunter Fan Company... -
Page 9: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42437-01 • 06/08/10 • Hunter Fan Company... -
Page 10: Installing The Canopy And Canopy Trim
Note: Should you need to remove the trim ring, press firmly on Trim opposite sides of the trim ring directly above the groove in the Ring hanger ball. The tabs will flex out releasing the canopy trim ring. Canopy Screw 42437-01 • 06/08/10 • Hunter Fan Company... -
Page 11: Assembling The Blades
Carefully remove the blade. Note: The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 12: Multi Staked Light Fixture
Housing housing assembly clockwise to lock the screws in place. Assembly Screw 7-4. Install the third housing assembly screw. 7-5. Tighten all three screws securely. Lower Switch Housing Notch Steps 7-3 - 7-5 42437-01 • 06/08/10 • Hunter Fan Company... - Page 13 Thumbscrews output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation. Steps 7-7 – 7-8 42437-01 • 06/08/10 • Hunter Fan Company...
-
Page 14: Fan
8-6. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 15: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 42437-01 • 06/08/10 • Hunter Fan Company...
Need help?
Do you have a question about the 28676 and is the answer not in the manual?
Questions and answers