EQUIPMENT PACKAGING
CONNECTING YOUR PHONE
RJ9 handset connector port
Handset Port
10/100Mbps RJ-45 port connecting to Ethernet, integrated PoE (GXP1105 only)
LAN Port
5V DC Power connector port
Power Jack
To set up the GXP1100/GXP1105, follow the steps below:
1. Attach the phone stand to the back of the phone where there is a slot for the phone stand;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used on GXP1105 in step 3, this step could be skipped;
FIRMWARE VERSION 1.0.8.4
INSTALLATION
Table 2: GXP1100/GXP1105 EQUIPMENT PACKAGING
Main Case
Handset
Phone Cord
Power Adaptor
Ethernet Cable
Phone Stand
Quick Start Guide
Figure 1: GXP1100/GXP1105 Ports
Table 3: GXP1100/GXP1105 CONNECTORS
GXP1100/GXP1105 USER MANUAL
Yes
1
Yes
1
Yes
1
Yes
1
Yes
1
Yes
1
Yes
1
Page 13 of 53